Flare Gas Recovery

Posted on May 15, 2018 | Hits: 16 | Stock No: #112319
 
Rating: 0 ( 0 Votes)
Country:   India
Region:   Maharashtra
City:   Nashik
Pin / Zip:   422011

Traditionally, in the Oil & Gas industry, waste and surplus gas
has been disposed of by flaring to atmosphere. Today this process is becoming
increasingly unacceptable as the industry progresses towards eliminating the
emission of greenhouse gases into the atmosphere, whilst simultaneously
conserving energy.

Our Flare Gas Recovery Units are installed in numerous refineries, oil
fields and gas fields worldwide. They can handle flows ranging from 200 to
6.000 m3/h (850 to 26.500 gpm), 1.2 to 30 bar (18 to 450 psi) for
sliding vane based Flare Gas Recovery Units, and from 1.200 to 15.000 m3/h
(5.200 to 66.000 gpm), 1.2 to 4.7 bar (18 to 70 psi) for liquid ring based
Flare Gas Recovery Units 

Flare Gas Recovery is the process of recovering the
waste gases that would normally be flared, so they can be used as fuel gas
elsewhere in the facility. This results in reduced emissions and cost savings.

























Crystaltcs facility’s safety depends on properly
integrating the Flare Gas Recovery
System
into the relief header and the flare system.Each gas contaminant and each gas product influence the optimal lineup
of treatment steps, and expertise is required to quickly evaluate these. An
internal study focusing on Iran has shown that approximately 50-70% of the
currently flared gas resources in Iran can actually be made into valuable
products with a payback period.

Application:

 

Flare Gas
Recovery Systems can following processes:

  ;

·&nbs p;       
Isolating the flare header with a
proprietary-design liquid seal or staging valve

·&nbs p;       
Recovering normally flared gases and
delivering them back into the facility so they can be processed and re-used as
fuel gas

·&nbs p;       
Removing liquids

·&nbs p;       
Compressing gases up to a defined pressure
level

· &nb sp;      
Cooling recovered gases

 

Our
liquid ring vacuum pumps and compressors are renowned for:

 

Ø  rugged
design construction - making them tolerant to carryover from process upsets

Ø  low
maintenance requirements - best up-time in the industry

Ø  cool-running
- making them ideal for handling the explosive gases found in refinery
applications, with pressures up to 215 PSIA (14.8 bar)

Ø  the largest and most
experienced technical staff in the industry

Ø  comprehensive
value-added centers throughout the world.

 




 

For more information contact us :- +91 253 2501600

< b>Visit us :- http://www.crystaltcs.com/









< br>










< br>










< br>










< br>










 

SPONSORED ADS:
​SONY​ USB Hard Disk 1TB ​New 3.1 High Speed​
Buy One Get One SONY 16GB Pen Drive ​Free​
SONY 1TB USB Hard Disk Just Rs.4900/-
Only At. :
​Shiv Computer Dwarka
7016034943, 9978123146

More Info : https://goo.gl/BD37s1
Make a Comment




Contact Info
Contact Name: Mr.Parjanya Kshirsagar  
Address: 309, Third Floor, Bodke Plaza, S.No. 425/1/1, Nashik Pune Road, Near Dwarka, Maharashtra, INDIA, 422
Phone: +91 253 2501600
More listings from this user
Email Seller

Please enter the text shown in the image in the box below.
The possible characters are letters from a to h in lower case
and the numbers from 1 to 9.






 

Similar Ads

Jet Vacuum Systems Manufacturers

Jet Vacuum Systems...

India, Maharashtra, Nashik, 422011
₹0.00